Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
692833 | Progress in Organic Coatings | 2011 | 7 Pages |
In this paper new modified anti-corrosive polyesteramide resins were obtained by means of a condensation polymerization reaction between N,N-bis (2-hydroxyethyl) linseed oil fatty acid amide (HELA) and phthalic anhydride (PA), which was partially replaced with pyromellitimide acetic acid (PAA) as a new dibasic acid source. The structure of the resin was confirmed by FT-IR and 1H NMR spectral studies. The coatings of 50 ± 5 μm thickness were applied to the surface of glass panels and mild steel strips by means of a brush. The coating performance of the resins was evaluated using international standard test methods and involved the measurement of phyisco-mechanical properties such as viscosity, drying time, specular gloss, pencil hardness, adhesion, flexibility and impact resistance. Chemical resistance of the resins to water, acid, alkali and solvent was also evaluated to ascertain their suitability as a surface coatings vehicle. The results show that the modification enhances both phyisco-mechanical and chemical properties. The resins were incorporated within primer formulations and evaluated as anti-corrosive single coatings. The results illustrate that the introduction of pyromellitimide acetic acid, containing a pyromellitimide ring, within the resin structure, enhances the corrosion resistance performance of polyesteramide resins.
► In this study polyesteramide resins were modified by introducing pyromellitimide ring. ► The results show that, the modification enhances both physico- mechanical and chemical properties. ► This improvement may be attributed to the combination of amide and imide groups. ► Also, the high molecular weight of the modifier improves the anti- corrosive performance.