| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 694035 | Progress in Organic Coatings | 2006 | 8 Pages |
The main purpose of this research is formulating and optimizing a new road-marking paint which is an environmentally friendly product. This paint is produced with an emulsion of an acrylic copolymer and contains the least of the volatile organic compounds. The formulation and optimization procedure is carried out on the base of experimental design by the method of mixture in which the important paint properties are modeled by using special cubic model. The present method has the capability of investigation the effect of raw materials at different levels with fewer experiments than factorial and fractional factorial design.In this research, the main parameters such as resin, pigment and filler were selected at different levels, and different samples were prepared by combination of additives and other required reagents. The properties of wet and dry films of the samples were determined using ASTM test methods. Different responses such as pigment volume concentration (PVC), latex critical pigment volume concentration (LCPVC), abrasion resistance, hardness, gloss, no pick up time and surface drying time, were selected as the objective functions of this study. By running DX6 software, using special cubic model and selection of desired range of end-use properties, the region of optimum paint formula was determined.The accuracy of the model was examined by preparing a sample in optimized region and by determining its final properties, experimentally. The results exhibit a good agreement between the model and experimental measurements. This product was compared with commercial solvent based traffic paint and good quality was reported in end-use properties.
