Synthesis of cuprous chloride and simultaneous recovery of Ag and Pd from waste printed circuit boards

A benign and effective process for cuprous chloride synthesis and simultaneously recovery of Ag and Pd from waste printed circuit boards (PCBs) was developed in the present study. The main merit of the process is that neither corrosive acid nor strong oxidant was used. The PCBs were firstly pretreated by thermal shock process to obtain metallic particles (MPs), then cuprous chloride was synthesized by reacting MPs with cupric sulfate in the presence of sodium chloride. The optimum VNacl/mCuSO4 (mL/g) ratio, [Cu]/[Cu2+] mole ratio, treatment time and operation temperature were 6, 0.95, 30 min and 60 °C, respectively. Approximately 98.5% of Cu could be recovered from the PCBs through two synthesis circles. During the synthesis process, Ag and Pd could be simultaneously recovered by forming a stable chloride complex since Cu2+ played the role of oxidant in the system. The recovery percentages of Ag and Pd were 93.9% and 95.3%, respectively. Accordingly, it is believed that the process developed in the current study is benign and practical for copper and precious metal (Ag, Pd) recovery from waste PCBs.