Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
6974331 | Process Safety and Environmental Protection | 2017 | 10 Pages |
Abstract
The switch from petro-diesel fuel to biodiesel blends for Compression Ignition engines have raised tribological performance concerns among major automobile manufacturers. Biodiesel dilution on engine lubricants could have adverse long-term effects on the engine efficiency, which will reduce the fuel economy, thus, leading to higher greenhouse gas emissions. Therefore, this study investigates the tribological impact of palm methyl ester (PME) diluted in SAE5W40 and SAE10W40 engine lubricants along different lubrication regimes under engine cold start condition. Through lubrication Stribeck curve analysis conducted using a pin-on-disc tribometer, coefficient of friction (CoF) for both engine lubricants showed parabolic maximum behaviour with increasing PME dilution. The CoF reduction beyond these peak values is attributed to the improved friction modifier effect from the now-dominant PME but with reduced load carrying capacity. An effective lubricant should possess both reasonable friction modifier effect and highest load carrying capacity in mitigating boundary friction. Hence, through the study, it could be deduced that the acceptable PME dilution threshold level for SAE5W40 is up to 17.5-vol%, while for SAE10W40 is between 28.0-vol% and 34.5-vol%. PME dilution levels beyond these thresholds could easily cause lubrication film rupture under high load, high shear rate conditions during application along the mixed to boundary lubrication regimes, inducing material wear.
Keywords
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Health and Safety
Authors
S.H. Hamdan, W.W.F. Chong, J.-H. Ng, C.T. Chong, S. Rajoo,