Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7003779 | Wear | 2018 | 30 Pages |
Abstract
The present study focuses on investigating the dominant friction and wear mechanisms in case of dry sliding of carbon nanoparticle reinforced nickel matrix composites under elastic and elasto-plastic contact conditions. For this purpose, multi-wall carbon nanotubes (CNT), onion-like carbon (OLC) and nanodiamonds (nD) were chosen to represent a large variety of carbon nanoparticles as they can be systematically distinguished regarding their carbon hybridization state (sp 2 vs. sp3) as well as their morphology and size (“0D” vs. “1D”). Contact simulations based on the Greenwood-Williamson model are conducted in order to calculate the required contact loads. Friction and wear analysis is supported by complementary characterization techniques, including scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopy, Raman spectroscopy, light microscopy as well as laser scanning microscopy. It is found, that only CNT provide efficient lubrication as reinforcement phase in composites, presenting different lubrication mechanisms for the tested contact conditions. The high aspect ratio of CNT is found to be essential for the lubrication mechanisms, allowing the particles to be dragged into the direct tribological contact. The lubrication effect increases with increasing volume content of CNT, reaching a maximum steady state frictional reduction of 50% compared to the unreinforced nickel reference.
Keywords
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Colloid and Surface Chemistry
Authors
L. Reinert, I. Green, S. Gimmler, B. Lechthaler, F. Mücklich, S. Suárez,