Article ID Journal Published Year Pages File Type
7051582 Experimental Thermal and Fluid Science 2018 26 Pages PDF
Abstract
In this paper, the evolution of the flow structures and the mixing characteristics in low-aspect-ratio (AR) noncircular incompressible synthetic jets are investigated. Two elongated configurations, elliptic and rectangular orifices with AR = 3 and 5 are used to produce synthetic jets at a Reynolds number of 166. The velocity fields in different spatial planes are measured by time-resolved two-dimensional particle image velocimetry (2D-PIV), and stereoscopic particle image velocimetry (S-PIV), respectively. The results show that the evolution of the vortical structures and the flow physics are influenced by the orifice configuration and AR. The first axis-switching location of the elliptic cases is closer to the jet orifice than that of the rectangular cases, while the AR = 3 cases undergo more upstream location and more times of axis switching than the AR = 5 cases. In addition to axis switching, noncircular synthetic jets are observed to develop streamwise vortices. The rectangular cases develop stronger streamwise vortices than the elliptic cases. The extended angle of streamwise vortices increases with the increasing AR, and is larger for the rectangular cases than the elliptic cases. In particular, the AR = 3 rectangular case has larger values of centerline streamwise velocity fluctuation, Reynolds stresses, mass flow rate and momentum flux than the other cases in the second axis-switching region, suggesting significantly enhanced mixing and momentum transportation characteristics. The mechanism could be attributed to its more evident vortex deformation and stronger streamwise vortices.
Related Topics
Physical Sciences and Engineering Chemical Engineering Fluid Flow and Transfer Processes
Authors
, , , ,