Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7064390 | Biomass and Bioenergy | 2014 | 6 Pages |
Abstract
The harvesting of microalgae is currently one of the bottlenecks hindering the commercial production of microalgae-based biofuels and products. The objective of this study was to determine the best flocculant and its optimum concentration in order to harvest the marine microalga Conticribra weissflogii (previously Thalassiosira weissflogii) for further use in the production of biofuels or bioelements. Experiments were conducted with cultures in the logarithmic and stationary growth phases. The low-charge FLOPAM® FO 4240 SH was the most effective at concentrations of 2 and 4 mg mâ3 in the LOG phase cultures, with flocculation efficiencies >90%. Smaller flocculation efficiencies were observed for cells in the stationary growth phase, most likely due to the production of dissolved organic carbon by the microalga. The highest microalgae density generated higher flocculation rates, whereas the pH and salinity negatively impacted flocculant efficiency.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Process Chemistry and Technology
Authors
Ricardo Bessler König, Rafael Sales, Fabio Roselet, Paulo Cesar Abreu,