Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7065128 | Biomass and Bioenergy | 2013 | 9 Pages |
Abstract
Biomass growing stocks, harvesting productivity and costs of energy production, were studied in thinnings of Quercus pyrenaica. Eleven forest sites were selected in coppices located in Castilla y León (Spain). Three systems were employed for harvesting: a mechanised whole tree harvesting (WTH) system, which included chipping at landing; a fully mechanised cut-to-length (CTL) harvesting system for firewood; and a semi-mechanised CTL system with manual felling and bunching. Three WTH trials had a hauling off 34.7-44.1 oven-dried tonnes (odt) haâ1. In contrast, only 11.6-30.0 odt haâ1 were obtained in the other eight CTL trials. Biomass weight equations for stems and whole trees were fitted. Worker operations were time-studied using software designed by the authors. The WTH system reached maximum productivity rates of 3.9 oven-dried tonnes per productive hour (odt hâ1) for the felling and bunching operation and 6.9 odt hâ1 for the forwarding operation. The mechanised CTL harvesting method achieved a productivity range of 1.3-0.5 odt hâ1 for the harvesting operation. Furthermore, the average forwarding productivity was 7.3 odt hâ1. Motor-manual felling and crosscutting in the CTL system accomplished a productivity range of 0.7-1.9 odt hâ1. Manual bunching resulted in similar values. The lowest firewood unit cost for trees with 10 cm of diameter at breast height (DBH) was 62.0 â¬Â odtâ1 using a semi-mechanised CTL system. Under similar conditions, this cost was 85.2 â¬Â odtâ1 for the mechanised CTL system. Finally, the cost corresponding to chips at landing from WTH sites (average DBH = 10 cm) was 65.3 â¬Â odtâ1.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Process Chemistry and Technology
Authors
Rubén Laina, Eduardo Tolosana, Yolanda Ambrosio,