Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7068529 | Bioresource Technology | 2018 | 40 Pages |
Abstract
We investigated the use of low concentrations of butanol (<40%, all v/v) as an organosolv pretreatment to fractionate lignocellulosic biomass into cellulose, hemicellulose, and lignin. The pretreatment conditions were optimized for sorghum bagasse by focusing on four parameters: butanol concentration, sulfuric acid concentration, pretreatment temperature, and pretreatment time. A butanol concentration of 25% or higher together with 0.5% or higher acid was effective for removing lignin while retaining most of the cellulose in the solid fraction. The highest cellulose (84.9%) and low lignin (15.3%) content were obtained after pretreatment at 200â¯Â°C for 60â¯min. Thus, pretreatment comprising 25% butanol, 0.5% acid, 200â¯Â°C, and 60â¯min process time was considered optimal. Enzymatic saccharification and fermentation by Saccharomyces cerevisiae produced 61.9â¯g/L ethanol from 200â¯g/L solid fraction obtained following pretreatment, and 10.2â¯g/L ethanol was obtained from the liquid fraction by xylose-utilizing S. cerevisiae following membrane nanofiltration to remove butanol.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Process Chemistry and Technology
Authors
Hiroshi Teramura, Kengo Sasaki, Tomoko Oshima, Hideo Kawaguchi, Chiaki Ogino, Takashi Sazuka, Akihiko Kondo,