Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7171002 | International Journal of Adhesion and Adhesives | 2018 | 15 Pages |
Abstract
A hybrid inversion method combining the finite element method and full-field displacement data was proposed to analyze the adhesive interface stress at a composite single-lap bonded joint. The displacement field distribution for the outer surface of the overlapped composite plate was measured through the two-dimensional digital image correlation method at different times by performing a tensile test. At the same time, the finite element analysis of the single-lap joint was carried out, which provided the data on structural deformation characteristics. Then, a polynomial interpolation method was used to establish the relation between the internal and external surface displacements. The displacements of the inner surface of the plate can be calculated from the measured displacement data of the outer surface of the plate by using the polynomial function. The displacements of the inner surface of the plate are regarded as the displacement load conditions for the outer and inner surfaces of the plate to establish the finite element model of the adhesive layer. The validity of the hybrid inversion method was proved by FEM analysis and experiments.
Related Topics
Physical Sciences and Engineering
Engineering
Mechanical Engineering
Authors
Ruixiang Bai, Shuanghua Bao, Zhenkun Lei, Cheng Yan, Xiao Han,