Interface damage and its effect on vibrations of slab track under temperature and vehicle dynamic loads

This paper presents a three-dimensional finite element model to investigate the interface damage occurred between prefabricated slab and CA (cement asphalt) mortar layer in the China Railway Track System (CRTS-II) slab track system. In the finite element model, a cohesive zone model with a non-linear constitutive law is introduced and utilized to model the damage, cracking and delamination at the interface. Combining with the temperature field database obtained from the three-dimensional transient heat transfer analysis, the interface damage evolution as a result of temperature change is analyzed. A three-dimensional coupled dynamic model of a vehicle and the slab track is then established to calculate the varying rail-supporting forces which are utilized as the inputs to the finite element model. The non-linearities of the wheel-rail contact geometry, the wheel-rail normal contact force and the wheel-rail tangential creep force are taken into account in the model. Setting the maximum interface damaged state calculated under temperature change as the initial condition, the interface damage evolution and its influence on the dynamic response of the slab track are investigated under the joint action of the temperature change and vehicle dynamic load. The analysis indicates that the proposed model is capable of predicting the initiation and propagation of cracks at the interface. The prefabricated slab presents lateral warping, resulting in severe interface damage on both the sides of the slab track along the longitudinal direction during temperature drop process, while the interface damage level does not change significantly under vehicle dynamic loads. The interface damage has great effects on the dynamic responses of the slab track.