Flow behavior around a square cylinder subject to modulation of a planar jet issued from upstream surface

The flow behavior in the up- and downstream regions of a square cylinder subject to the modulation of a planar jet issued from the cylinder׳s front surface was studied using the laser-assisted smoke flow visualization method and hot-wire anemometer measurement. Reynolds numbers were from 1628 to 13 000. The drag force experienced by the square cylinder was obtained by measuring the surface pressures on the up- and downstream faces. The temporally evolving smoke flow patterns in the up- and downstream regions were synchronously revealed through the smoke flow visualization. The frequency characteristics of the instability waves in the up- and downstream regions were synchronously detected by the two hot-wire anemometers. Four characteristic flow modes were observed within the different ranges of the injection ratios. At the low injection ratios (IR<1), the 'swinging jet' appeared. The jet swung periodically leftward and rightward and formed a fluid bubble on the front surface. The fluid bubble contained a pair of counter-rotating vortices and presented a periodic variation in its height. At moderately low injection ratios (18.3) injection ratios, the 'deflection jet' and 'penetrating jet' appeared. The jet detached from the cylinder׳s front surface and penetrated a long distance into the upstream region due to large jet momentum. Neither periodic jet oscillation in the upstream region nor vortex shedding in the wake was observed. The drag coefficient was found to be decreasing quickly with increasing the injection ratio.