Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7176584 | Journal of Materials Processing Technology | 2018 | 24 Pages |
Abstract
VN alloy/Co-based composite coatings modified by Ti was prepared on a mild steel using laser cladding. The effect of Ti addition on the microstructure and wear resistance of VN alloy/Co-based coatings was investigated using optical microscopy, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, micro hardness tester and wear tester. The results showed that TiN and VC phases were detected in the VN alloy/Co-based composite coatings after adding Ti, in addition to γ-Co, Cr23C6 and Ï-FeV phases. Massive short rod-like dendrites, equiaxed grains and fine grains appeared in the composite coatings after adding Ti, and the cross-slip and jog of the dislocation disappeared. The microhardness of the composte coatings was increased significantly with the increase of additive Ti, and was improved by 21.6%, for 9.6 wt.% Ti addition. The wear resitance of the composite coatings was firstly increased and thereafter decreased with the increase of additive Ti, and was improved by 25.9%, for 4.8 wt.% Ti addition. The abrasive mechanism of the composite coatings after adding Ti was the abrasive wear. Thus, it can be concluded that adding Ti effectively promotes the formation of TiN and VC particles to improve the wear resistance of the composite coatings.
Related Topics
Physical Sciences and Engineering
Engineering
Industrial and Manufacturing Engineering
Authors
Lin Ding, Shengsun Hu, Xiumin Quan, Junqi Shen,