Fabrication of disk microelectrode arrays and their application to micro-hole drilling using electrochemical micromachining

Minimal-taper microholes are widely used in modern industries. Electrochemical micromachining (EMM) has been demonstrated to be a feasible method to fabricate these microholes. In this study, based on its unique processing properties and productivity, a disk microelectrode array was fabricated via electrolysis for producing micro-holes. The dimensions of the cathode for hydrolysis were optimized by applying the finite element method to the constructed physical model. A 3 × 3 disk microelectrode array and a 5 × 5 cylindrical microelectrode array with uniform dimensions were then fabricated using the optimized cathode. Micro-holes were drilled on stainless-steel plates using both disk and cylindrical microelectrode arrays. The taper of the resulting micro holes obtained using the new disk microelectrode array was lower than that of the holes formed using the cylindrical microelectrode array. The effects of EMM parameters, including the applied voltage, feeding speed, and pulse-on time, on the hole diameter and taper were also investigated. The results suggest that appropriate machining parameters should be selected in consideration of the effects of these parameters on hole diameter, taper, localization, and material removal rate.