Article ID Journal Published Year Pages File Type
7227985 Procedia Engineering 2017 8 Pages PDF
Abstract
With the increasing use of hydrocodes in modelling and system design, benchmarking of software against experiments has become even more vital. While substantial work has been done in this regard, comparisons with temperature data within dynamic experiments are sparse due to experimental limitations. However, novel developments in measurement techniques has enabled the in-flight acquisition of hypervelocity projectile temperature, providing a new source for validation. This is achieved by tracking the decay of an induced magnetic field which is related to conductivity and further correlated to material temperature. As such, an AC-14 bare shaped charge with a copper lining is simulated using CTH, and benchmarked against experimental temperature results observed by Uhlig and Hummer. Particular attention was given to the slug temperature profiles after separation, and the effect of varying equation-of-state and strength models. Simulations are in agreement with experimental results, with a best case of under 2% error between the observed and simulated temperatures for this shaped charge setup. This varied notably (around 20% variance) depending on strength model. Jet structures compare well with radiographic images and are consistent with ALEGRA simulations previously conducted. SAND2017-3686C.
Related Topics
Physical Sciences and Engineering Engineering Engineering (General)
Authors
, , , , , ,