Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
730490 | Measurement | 2012 | 10 Pages |
At present, the detection of rotary axis is a difficult problem in the errors measurement of NC machine tool. In the paper, a method with laser tracker on the basis of multi-station and time-sharing measurement principle is proposed, and this method can rapidly and accurately detect the rotary axis. Taking the turntable measurement for example, the motion of turntable is measured by laser tracker at different base stations. The redundant equations can be established based on the large amount of measured data concerning the distance or distance variation between measuring point and base station. The coordinates of each measuring point during turntable rotation can be accurately determined by solving the equations with least square method. Then according to the error model of rotary axis, the motion error equations of each measuring point can be established, and each error of turntable can be identified. The algorithm of multi-station and time-sharing measurement is derived, and the error separation algorithm is also deduced and proved feasible by simulations. Results of experiment show that a laser tracker completes the accuracy detection of the turntable of gear grinding machine within 3 h, and each error of the turntable are identified. The simulations and experiments have verified the feasibility and accuracy of this method, and the method can satisfy the rapid and accurate detecting requirements for rotary axis of multi-axis NC machine tool.
► A laser tracker is used to detect the rotary axis of NC machine tool based on GPS. ► The measurement principle of this method and its algorithm are given in detail. ► Each error of rotary axis can be easily separated by this method. ► Simulations and experiments have verified the feasibility of this method. ► This method has high measurement efficiency and accuracy.