| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 738291 | Sensors and Actuators A: Physical | 2010 | 5 Pages |
The planar Hall effect (PHE) sensor with a junction size of 3 μm × 3 μm for a single micro-bead detection has been fabricated successfully using a typical spin-valve thin film Ta(5)/NiFe(16)/Cu(1.2)/NiFe(2)/IrMn(15)/Ta(5) nm. The PHE sensor exhibits a sensitivity of about 7.2 μV Oe−1 in the magnetic field range of ±7 Oe approximately. We have performed an experiment to illustrated the possibility of single micro-bead detection by using a PHE sensor. A single micro-bead of 2.8 μm diameter size is secluded from 0.1% dilute solution of the Dynabeads® M-280 dropped on the sensor surface and is located on the sensor junction by using a micro magnetic needle. The comparison of the PHE voltage profiles in the field range from 0 to 20 Oe in the absence and presence of a single micro-bead identifies a single Dynabeads® M-280, the maximal signal change as large as ΔV ∼ 1.1 μV can be obtained at the field ∼6.6 Oe. The results are well described in terms of the reversal of a basic single domain structure.
