High-reflectivity mirrors by Al2O3, LaF3 and AlF3 for 193 nm application

•Three high-reflectivity mirrors at 193 nm were produced.•The reflectance of all the three mirrors could achieve up to 98%.•The reflectance of Al2O3/AlF3 coatings was limited to the absorption of Al2O3.•The reflectance of LaF3/AlF3 coatings was limited to the micro-cracks.•The coating composed of Al2O3, LaF3 and AlF3 obtained the highest reflectance.

As important components in deep-ultraviolet (DUV) optics, especially 193 nm lithographic systems, high-reflectivity (HR) mirrors with excellent optical properties and long lifetimes are needed urgently. In this study, we designed and produced three HR coatings for 193 nm on fused quartz substrates: Al2O3/AlF3 coating, LaF3/AlF3 coating and a double stack mirror with combined Al2O3/AlF3 and LaF3/AlF3. The reflectance of the Al2O3/AlF3 coating with 14 layer pairs reached 98.0% at 193 nm. However, the absorption of Al2O3 prevented the reflectance to increase further. The maximum reflectance of the LaF3/AlF3 coating with 15 layer pairs reached 98.1%, with initial micro-cracks formation. The reflectance decreased as the number of layer pairs increased to 16 because of numerous micro-cracks. The mirror with combined Al2O3/AlF3 and LaF3/AlF3 coatings which combined their advantages obtained a reflectance of 98.8% at 193 nm after deposition. This value could still reach 98.5% at 4 months after deposition and remain stable thereafter. Therefore, the combined coating of Al2O3/AlF3 and LaF3/AlF3 is an excellent candidate for practical application.