| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 739619 | Optics & Laser Technology | 2012 | 8 Pages |
To investigate the influencing rules of the variations of powder and laser defocusing distance on surface quality and obtain the smooth surface of parts in laser direct metal deposition, the thin-walled metal parts were fabricated under three different powder defocusing distances and three different laser defocusing distances conditions. The experimental results show that a high surface quality can be obtained with the powder focussed below the substrate and laser focussed above the substrate process, and the variation in which the powder focus moves from above to below the melt pool plays a leading role and the variation in which the laser focus moves from above to below the melt pool plays a supplementary role in the influence on the surface quality. To explain the experimental results, a simple model of the track height is established.
► Influencing rules of the powder defocusing distance on surface quality were investigated. ► To explain experimental results, a simple model of the track height is established. ► A high surface quality can be obtained with the powder focussed below the substrate process.
