Fabrication of microstructures in Foturan glass using infrared femtosecond laser pulses and chemical etching

In this study, a method for the fabrication of microstructures on the surface and inside Foturan glass by femtosecond laser-induced modification was developed. This technique was followed by heat treatment to crystallize the modified area, and the specimen was then placed in an 8% HF acid solution for chemical etching. The fabricated microstructures were observed using scanning electron microscopy (SEM). The results demonstrated that the etching time is an important parameter in the fabrication of microstructures on Foturan glass. An example of a tapered U-shaped microchannel with a minimized neck diameter of about 5 μm at the central point for cell detection is presented.