Article ID Journal Published Year Pages File Type
747654 Solid-State Electronics 2014 6 Pages PDF
Abstract

•A series of high-κ dielectric materials were deposited on AlGaN/GaN.•Interfacial quality characterization was performed by conductance method.•HfO2 showed the lowest interface trap density.•HfAlOx provided good electrical characteristics with high thermal stability.

High-κ insulating materials (HfO2, HfO2/Al2O3, HfAlOx, and HfSiOx) were deposited by atomic layer deposition (ALD) on AlGaN/GaN to form Metal–Insulator–Semiconductor Heterostructure Field Effect Transistors (MISHFETs) and were electrically and structurally characterized. The objective of this study is to characterize the interface quality and correlate the results with electrical phenomena for each insulating material. Although there are many studies using HfO2 and Al2O3 on AlGaN, there is limited experimental data using ternary compounds such as HfAlOx or HfSiOx, compared to their binary counterparts. In this work, interface trap density, Dit, was extracted by the conductance method using on-chip metal–insulator–semiconductor heterostructure capacitors (MISHCAPs). HfO2 was measured to have the lowest trap density at low energies on the order of 1012 cm−2 eV−1 and quickly reduced about one order of magnitude less than the others at higher trap energies. HfO2/Al2O3, HfAlOx, and HfSiOx all had similar trap densities on the order of 1012 cm−2 eV−1. Ultra-low gate leakage levels were achieved, especially for HfAlOx on the orders of 10−12 A/mm. Our studies indicate that HfAlOx provides the best electrical characteristics such as lowest gate leakage current, largest channel carrier density and resistance to self-heating effects without the vulnerability to low crystallization temperatures.

Related Topics
Physical Sciences and Engineering Engineering Electrical and Electronic Engineering
Authors
, ,