Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
755323 | Applied Acoustics | 2008 | 13 Pages |
Abstract
The phased beam tracing method (PBTM) was suggested as a medium-frequency simulation technique for the calculation of impulse response, although main assumptions of geometric acoustics still hold. The phased method needs the reflection coefficient for characterizing the acoustic property of a surface and the complex wave number for describing the propagation characteristics. In this study, two types of approximate real reflection coefficients derived from the measured absorption coefficient were tested for a practical applicability. As a test example, pressure impulse responses and energy impulse responses computed from the PBTM were compared with those from the measurement and the ordinary beam tracing method. The PBTM employing the approximate reflection coefficients greatly increased the accuracy of the prediction compared to the ordinary beam tracing method, in particular at the medium-frequency range in octave bands above the Schroeder cutoff frequency. A comparison was made between angle-dependent and angle-independent reflection coefficients in the calculation of acoustic measures. Although the angle-dependent reflection coefficient yielded best matched results with measured data, but the simple angle-independent reflection coefficient can be also used with a reasonably good precision.
Keywords
Related Topics
Physical Sciences and Engineering
Engineering
Mechanical Engineering
Authors
Cheol-Ho Jeong, Jeong-Guon Ih, Jens H. Rindel,