Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
760169 | Energy Conversion and Management | 2016 | 9 Pages |
•Two working pairs (LiCl-H2O and LiBr-H2O) are examined in a solar absorption chiller.•The examined single effect absorption chiller is driven by flat plate collectors.•The system is analyzed energetically and energetically for 3 ambient temperatures.•LiCl-H2O performs better than LiBr-H2O in all the examined cases.•The optimum operating temperature is lower for the case of pair LiCl-H2O.
The objective of this study is to investigate the use of an alternative working pair in a solar absorption cooling system. LiCl-H2O is the new examined pair and it is compared energetically and exegetically with the conventional pair LiBr-H2O, which is the most usual in air-conditioning applications. The simplest solar cooling system is analyzed in order to focus in the comparison between these working fluids. Specifically, flat plate collectors, coupled with a storage tank, feed the single effect absorption chiller which produces 250 kW cooling at 10 °C. The two pairs are examined parametrically for various heat source temperature levels and for three ambient temperature levels (25 °C, 30 °C and 35 °C). The minimization of the collecting area, which means maximum exergetic efficiency, is the optimization goal in every case. The final results show that LiCl-H2O pair performs better in all cases by giving greater exergetic efficiency. More specifically, about 8% lower collecting area is required to cover the demanded cooling load with this working pair. Another interesting result is that the optimum heat source temperature for the LiCl-H2O is roughly lower than the respective for the LiBr-H2O. The system is analyzed in steady state with the commercial software Engineering Equator Solver (EES).
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slide