Frequency fine-tuning in Class IV flextensional transducers

Class IV flextensional transducers (FTs) are the best-known FTs in literature. These are light-weight projectors (compared to the conventional Tonpilz designs) with capability for high power delivery at low frequencies. The resonance frequencies of this type of transducers are known to be dominantly dependent on the characteristics of the outer shell than on the driver stack. Consequently, the method of achieving fine-tuning of the transducer by modifying the characteristics of the stack, as practiced in the case of Tonpilz designs, is not very effective. This paper describes a method for fine-tuning of the frequency of a Class IV FT, which involves only a modification of a pair of small components used for coupling the stack to the transducer. The effectiveness of the method is examined by finite element modelling using the package ATILA, in the case of a 3 kHz aluminium shell transducer. Experimental results are also presented.