Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
763321 | Engineering Failure Analysis | 2016 | 10 Pages |
•The stress strain state in mechanically heterogeneous welded joints was analysed.•Analytical expressions for the stress strain state in welded joints are proposed.•The numerical simulation showed a good agreement with the analytical solution.•The proposed equations could be used in design practice.
This paper aims to investigate the stress–strain state in mechanically heterogeneous welded joints with a single-V butt weld by an analytical model along with a numerical simulation. Analytical expressions for the stress–strain state in both the weld and the main material are proposed. In order to verify the proposed expressions, a numerical simulation of the stress–strain state in a mild welded joint with a single-V butt weld was carried out on the basis of the finite element method and the results were compared with the analytical solution obtained applying the proposed analytical model. EP-787 and JONI 13/45А steels were used for the weld while 15X2MFА steel was used for the main material in the analysed welded joints. A comparison of the analytical solution with the finite element analysis results showed a good agreement. The proposed equations could be used in design practice for calculations of the stress–strain state in welded joints.