Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
764428 | Energy Conversion and Management | 2012 | 9 Pages |
Carbon capture and sequestration (CCS) is an important option for CO2 mitigation and an optimized CO2 pipeline transport system is necessary for large scale CCS implementation. In the present work, a hydrodynamic model for CO2 pipeline transport was built up and the hydrodynamic performances of CO2 pipeline as well as the impacts of multiple factors on pressure drop behavior along the pipeline were studied. Based on the model, an economic model was established to optimize the CO2 pipeline transport system economically and to evaluate the unit transport cost of CO2 pipeline in China. The hydrodynamic model results show that pipe diameter, soil temperature, and pipeline elevation change have significant influence on the pressure drop behavior of CO2 in the pipeline. The design of pipeline system, including pipeline diameter and number of boosters etc., was optimized to achieve a lowest unit CO2 transport cost. In regarding to the unit cost, when the transport flow rate and distance are between 1–5 MtCO2/year and 100–500 km, respectively, the unit CO2 transport cost mainly lies between 0.1–0.6 RMB/(tCO2 km) and electricity consumption cost of the pipeline inlet compressor was found to take more than 60% of the total cost. The present work provides reference for CO2 transport pipeline design and for feasibility evaluation of potential CCS projects in China.
► We build a static hydrodynamic model of CO2 pipeline for CCS application. ► We study the impact on pressure drop of pipeline by viscosity, density and elevation. ► We point out that density has a bigger impact on pressure drop than viscosity. ► We suggest dense phase transport is preferred than supercritical state. ► We present cost-optimal pipeline diameters for different flowrates and distances.