Damage accumulation modeling under uniaxial low cycle fatigue at elevated temperatures

•New fatigue damage accumulation model is presented.•Forecast fatigue life in the scope of low cycle uniaxial loadings at elevated temperatures.•Low number of material constants in proposed model.•Experimental verification on the base on EN AW-2024T3 aluminum and 2Cr–2WVTa steel.

The paper presents a fatigue damage accumulation model, which allows us to predict fatigue life under low cycle uniaxial loadings at elevated temperatures. The structure of the model has been based on the stress–strain curves obtained during the experimental study. The model has been verified experimentally by applying experimental studies carried out on ENAW-2024T3 aluminum alloy and 2Cr–2WVTa steel. Moreover, a comparison between the results of fatigue life prediction using the proposed damage accumulation model was done with the results obtained on the basis of various generally applied models, based on the Manson–Coffin dependency. Furthermore this paper presents the results of experimental studies carried out on the aluminum alloy ENAW 2024 T3 under uniaxial low cycle fatigue loadings in the conditions of elevated temperatures. In the course of the study, material constants and the parameters of the stress–strain curve in the range of low cycle fatigue for four levels of temperatures (20, 100, 200 and 300 °C) were set.