Sonochemical synthesis of WS2 nanosheets and its application in sonocatalytic removal of organic dyes from water solution

In this research, tungsten disulfide (WS2) nanosheets as sonocatalyst were synthesized through a sonochemical route. Characterization of as-synthesized sonocatalyst was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), Dot-mapping, high resolution transmission electron microscopy (HRTEM), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS) analysis. WS2 nanosheets were evaluated for their sonocatalytic performance in order to remove basic violet 10 (BV10) under ultrasonic irradiation. The removal efficiency was maximized (94.01%) via the use of 1 g L−1 catalyst and 10 mg L−1 BV10 at pH = 4.5 and an ultrasonic power of 400 W within a reaction time of 150 min. In addition to BV10, the sonocatalytic elimination for a number of organic dyes viz. direct blue 71, acid blue 92, methylene blue, basic orange 2 and basic red 46 was examined to demonstrate the performance of WS2 nanosheets under the ultrasonic irradiation. The experimentation of trapping was conducted using edetate disodium (EDTA-2Na), tert-butyl alcohol (t-BuOH), and benzoquinone (BQ). According to the results, all radicals participated in the sonocatalytic activity. OH played a more prominent role than h+ and O2-∙ in the process of BV10 separation. Following five repetitive runs, the nanocomposites revealed a reusability of circa 18% drop in the elimination efficiency. The main removal intermediates were recognized by GC-MS technique.