Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7702689 | Ultrasonics Sonochemistry | 2018 | 29 Pages |
Abstract
The influence of ultrasonication treatment on the catalytic performance of CuY zeolite catalysts was investigated for the liquid-phase oxidative carbonylation of methanol to dimethyl carbonate (DMC). The deammoniation method of NH4Y into HY zeolites was optimized and characterized by elemental analyzer, derivative thermogravimetry, Brunauer-Emmett-Teller (BET) analyzer, and powder X-ray diffractometry, revealing that the HY zeolite deammoniated at 400â¯Â°C presented the highest surface area, complete ammonium/proton ion exchange, and no structure collapse, rendering it the best support from all the prepared zeolites. CuY zeolites were prepared via aqueous phase ion exchange with the aid of ultrasonication. Upon ultrasonication, the Cu+ active centers were uniformly dispersed in the Y zeolites, penetrating the core of the zeolite particles in a very short time. In addition to enhancing the Cu dispersity, the ultrasonication treatment influenced the BET surface area, acid amount, Cu+/Cu2+ ratio, and also had a relatively small impact on the Cu loading. Consequently, adequate exposure to ultrasonication was able to increase the conversion rate of methanol into dimethyl carbonate up to 11.4% with a comparable DMC selectivity of 23.7%. This methanol conversion is 2.65 times higher than that obtained without the ultrasonication treatment.
Related Topics
Physical Sciences and Engineering
Chemistry
Chemistry (General)
Authors
Je-Min Woo, Jung Yoon Seo, Hyunuk Kim, Dong-Ho Lee, Young Cheol Park, Chang-Keun Yi, Yeong Seong Park, Jong-Ho Moon,