Article ID Journal Published Year Pages File Type
771035 Engineering Fracture Mechanics 2010 12 Pages PDF
Abstract

This paper presents the T-stress solutions (T11 and T33) for semi-elliptical axial surface cracks in a cylinder subjected to mode-I non-uniform stress on the crack surface. Two cylindrical geometries with inner radius (Ri) to wall thickness (t) ratios Ri/t = 5 and 10 were considered. The T-stresses were applied along the crack front for normalized crack depth values a/t of 0.2, 0.4 and 0.5 and aspect ratios a/c of 0.2, 0.4, 0.6 and 1.0. Three stress distribution; uniform, linear and parabolic were applied to the crack face. In addition to these solutions, concrete formulation of the superposition principle is given for the T33-stress, which is known as an elastic parameter that describes the out-of-plane crack tip constraint effect. Then, the validity of the formulation was shown through application of our T-stress solutions to the problem of an axial semi-elliptical surface crack in a cylinder subjected to internal pressure, and checking that the principle of superposition holds for the problem.

Related Topics
Physical Sciences and Engineering Engineering Mechanical Engineering
Authors
, , ,