Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
776904 | International Journal of Impact Engineering | 2011 | 6 Pages |
Uniaxial tensile experiments were performed on pig skin to investigate the tensile stress–strain response at both quasi-static and dynamic rates of deformation. A Kolsky tension bar, also called a split Hopkinson tension bar (SHTB), was modified to conduct the dynamic experiments. Semiconductor strain gages were used to measure the low levels of the transmitted signal from pig skin. A pulse shaper technique was used for generating a suitable incident pulse to ensure stress equilibrium and approximate constant strain rate in the specimen of a thin skin sheet wrapped around the ends of the bars for minimizing radial inertia. In order to investigate the strain-rate effect over a wide range of strain rates, quasi-static tests were also performed. The experimental results show that pig skin exhibits rate-sensitive, orthotropic, and non-linear behavior. The response along the spine direction is stiffer at lower rate but is less rate sensitive than the perpendicular direction. An Ogden model with two material constants is adopted to describe the rate-sensitive tensile behavior of the pig skin.