Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
780873 | International Journal of Fatigue | 2013 | 9 Pages |
Fatigue and fracture mechanisms have been studied in a steel-based metal matrix composite (MMC), comprising a 316L austenitic matrix reinforced with 25 wt.% particulate titanium diboride (TiB2). The fracture toughness was determined in the as-HIPped condition as being slightly below 30 MPa√m. Fatigue crack growth rates have been determined, and corrected for the effects of crack closure. The fracture surfaces have been studied to determine the mechanisms of damage during crack advance, which are determined as matrix fatigue, reinforcement particle fracture, and ductile rupture of the matrix. We show that the occurrence of damage mechanisms during fatigue of the material is linked to Kmax, rather than to ΔK. This is rationalised in terms of a semi-cohesive process zone within the monotonic plastic zone ahead of the crack tip.
► Fatigue and fracture properties determined for an Fe/TiB2 particulate MMC. ► Fatigue crack growth rates are dependent on ΔK, and faster than in the steel matrix. ► Failure mechanisms determined from fracture surface analysis are dependent on K-max. ► As K-max increases, particle fracture increases, matrix fatigue decreases. ► At low ΔK, larger particles are observed on the fracture surface.