| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 78363 | Solar Energy Materials and Solar Cells | 2012 | 6 Pages |
A loss analysis is carried out for monocrystalline large-area p-type metal wrap through passivated emitter and rear cells (MWT–PERC) with thermal SiO2/SiNx surface passivation reaching a maximum conversion efficiency of 20.6%. Analytical and numerical device modelling identifies the most important loss mechanisms and allows for a separation of the different series resistance contributions and various short circuit current loss mechanisms. Based on the extracted data, an estimation of the possible maximum conversion efficiency for p-type MWT–PERC solar cells is given.
Graphical AbstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► An in-depth characterisation of MWT–PERC devices with η=20.6% is presented. ► Identification of major loss mechanisms allows for specific technological optimisation. ► In spite of LID, a low base resistivity of ∼0.7 Ω cm is beneficial for p-type PERC devices. ► A conversion efficiency of >21% is expected for p-type Cz-Si MWT–PERC devices.
