On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites

•A new mechanics model for cutting FRP composites with/without tool vibration.•Explored for the first time the material removal mechanisms of EVA cutting.•Identified the critical depth of cut beyond which the debonding depth does not vary.

This paper aims to reveal the material removal mechanisms and the mechanics behind the vibration-assisted cutting (VAC) of unidirectional fibre reinforced polymer (FRP) composites. Through a comprehensive analysis by integrating the core factors of the VAC, including fibre orientation and deformation, fibre–matrix interface, tool–fibre contact and tool–workpiece contact, a reliable mechanics model was successfully developed for predicting the cutting forces of the process. Relevant experiments conducted showed that the model has captured the mechanics and the major deformation mechanisms in cutting FRP composites, and that the application of ultrasonic vibration in either the cutting or normal direction can significantly decrease cutting forces, minimise fibre deformation, facilitate favourable fibre fracture at the cutting interface, and largely improve the quality of a machined surface. When the vibrations are applied to both the cutting and normal directions, the elliptic vibration trajectory of the tool tip can bring about an optimal cutting process. There exists a critical depth of cut, beyond which the fibre–matrix debonding depth is no longer influenced by the vibration applied on the tool tip.