A lower bound on snap-through instability of curved beams under thermomechanical loads

A non-linear finite element formulation (three dimensional continuum elements) is implemented and used for modeling dynamic snap-through in beams with initial curvature. We identify a non-trivial (non-flat) configuration of the beam at a critical temperature value below which the beam will no longer experience snap-through under any magnitude of applied quasi-static load for beams with various curvatures. The critical temperature is shown to successfully eliminate snap-through in dynamic simulations at quasistatic loading rates. Thermomechanical coupling is included in order to model a physically minimal amount of damping in the system, and the resulting post-snap vibrations are shown to be thermoelastically damped. We propose a test to determine the critical snap-free temperature for members of general geometry and loading pattern; the analogy between mechanical prestress and thermal strain that holds between the static and dynamic simulations is used to suggest a simple method for reducing the vulnerability of thin-walled structural members to dynamic snap-through in members of large initial curvature via the introduction of initial pretension.

► Determine the snap-through boundary of curved systems under thermomechanical loads. ► This limit also reduces the amplitude of the oscillations under transient loadings. ► An analytical test to determine this boundary is proposed.