Article ID Journal Published Year Pages File Type
78544 Solar Energy Materials and Solar Cells 2012 7 Pages PDF
Abstract

ZnO single-crystalline nanowires (NWs) are highly relevant 1D-nanostructures for efficient charge collection in dye sensitized solar cells (DSSCs). In a first part of the paper, ZnO-NWs have been grown by electrochemistry on various fluorine-doped transparent oxide (FTO) coated glass substrates. The effects of substrate treatments and of the presence of an underlayer of TiO2 or ZnO on the cell performance are reported. In particular, we show that the presence of a TiO2 underlayer gives rise to a dense array of ZnO-NWs with a high aspect ratio (>30) and to the cells with the best performances. However, the roughness of the NW arrayed films were not sufficient for the efficient harvesting of sunlight and low fill factors were found. In a second step, hierarchical structures have been designed by growing electrochemically a secondary nanoporous epitaxial ZnO phase on the wire surface. We have found that the cell performances were significantly improved in that case due to a much larger specific surface area and to a much better fill factor. We also show that the cell efficiencies of hierarchical structures did not follow the performances of the starting ZnO-NWs. The volume occupied by the second phase, its thickness and its connection to the wires are important parameters for cell optimizing.

► We have studied the effect of FTO on ZnO nanowires arrays grown by electrodeposition. ► Hierarchical structures have been designed, epitaxially combining ZnO nanowires and a porous ZnO phase. ► Dye-sensitized solar cells have been fabricated from these structures and characterized. ► Optimized composite structure gave rise to a power conversion efficiency of 4.1%.

Related Topics
Physical Sciences and Engineering Chemical Engineering Catalysis
Authors
, , ,