Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior

•We developed a novel multiscale model of hot working with DRX.•The macroscopic hot-working behavior can be calculated on the basis of the DRX microstructure.•The model was applied to the nonuniform compression of a cylinder.•The model can consider the dependence of the macroscopic mechanical behavior on the initial microstructure.

Dynamic recrystallization (DRX) occurs during the hot-working of a metallic material with low-to-medium stacking-fault energy. The macroscopic mechanical behavior during hot-working is largely affected by the microstructure evolution due to DRX. In this study, a novel multiscale hot-working model was developed by coupling the multi-phase-field dynamic recrystallization (MPF-DRX) model and large deformation elastic–plastic finite element (FE) method using J2 flow theory to evaluate the microstructure evolution and macroscopic mechanical behavior, respectively. We call this model the multi-phase-field and finite element dynamic recrystallization (MPFFE-DRX) model. Compression simulations with nonuniform deformation of a cylinder confirmed that the newly developed MPFFE-DRX model can be used to evaluate the macroscopic mechanical behavior during hot-working by considering the DRX microstructure evolution, which differs depending on the area. We also confirmed that the MPFFE-DRX model can be used to simulate macroscopic mechanical behavior depending on the initial microstructure by varying the initial grain size.