High quality textured ZnO:Al surfaces obtained by a two-step wet-chemical etching method for applications in thin film silicon solar cells

ZnO:Al films deposited at 250 °C on Corning glass by radio frequency magnetron sputtering were studied for their use as front contact for thin film silicon solar cells. For this purpose, a two-step etching method combining different concentrations of diluted hydrochloric acid (from 0.1% to 3%) with different etching times was developed. Its influence on morphological, electrical and optical properties of the etched films was evaluated. This new etching method led to more uniform textured surfaces, where the electrical properties remained unchangeable after the etching process, and with adapted light scattering properties similar to those exhibited by commercial substrates.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► A new etching method to texture ZnO:Al films deposited at high temperature. ► Main application for these etched films is p–i–n amorphous silicon solar cells. ► A new two-step etching using different HCl concentrations. ► Compared with the conventional one-step method. ► Also compared to the commercially textured ASAHI-U substrate.