A newly developed tool without probe for friction stir spot welding and its performance

A newly developed tool for friction stir spot welding (FSSW) has been proposed, which has no probe, but a scroll groove on its shoulder surface (scroll tool). By use of this tool, FSSW has been performed on aluminium alloy 6061-T4 sheets and the potential of the tool was discussed in terms of weld structure and static strength of welds. The experimental observations showed that the scroll tool had comparable or superior performance to a conventional probe tool. It was confirmed that sound welding could be achieved without a probe hole, in which the scroll groove played significant roles in the stirring of the material and the shoulder plunge depth was the important processing variable. The maximum tensile-shear strength of the welds made by the scroll tool was found to be 4.6 kN that was higher than that of the welds made by the probe tool and two different fracture modes, shear fracture and plug fracture, appeared depending on processing condition. The shear fracture took place at smaller shoulder plunge depths or at shorter tool holding times, while the plug fracture occurred at larger shoulder plunge depths or at longer tool holding times. It was indicated that the tensile-shear strength and associated fracture modes were determined by two geometrical parameters in the weld zone.