Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7952181 | Journal of Materials Science & Technology | 2017 | 7 Pages |
Abstract
Nickel coated diamond composite powders were fabricated via a newly developed direct electrodeposition technique. The effects of activators on the coating of diamond were firstly investigated and diamond grinding wheels were then prepared from Ni-coated diamond composite powders with different activators. The microstructural characterizations of this composite powders were finally conducted by scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction, and the mechanical and tribological properties of as-prepared diamond grinding wheels were also measured. There are changes in microstructures and properties of the composite powders with activators. The activator concentration also has an influence on the morphologies and phase structures of the Ni coating on diamond particles. The composite powders with more compact coating of nickel can be prepared by adding 1 g dmâ3 or more AgNO3 as an activator to electrodeposit nickel on diamond. The mechanical and tribological properties of diamond grinding wheels were significantly improved when the coating phase structure of Ni crystal grew with (111) plane orientation on the surface of diamond particles. The wheels made from nickel coated diamond composite powders possessed the advantages of easy preparation and outstanding tribological properties. Therefore, Ni coated diamond composite powders exhibit a great potential to be extensively applied in diamond cutting and grinding tools.
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Chemistry
Authors
Zongshi Zuo, Bonian Hu, Hong Chen, Qizhi Dong, Gang Yu,