Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7954897 | Procedia Structural Integrity | 2018 | 6 Pages |
Abstract
The present work is focused on the analysis of fracture in adhesive bonded Double Cantilever Beam (DCB) specimens with 3D printed nylon substrates. The substrates were obtained using selective laser sintering of polyamide powder and embed sub-surface channels with circular and square cross-section. The proposed strategy allows to mimic the crack trapping effect already observed in a multitude of biological materials, that is originated by the spatial modulation of the driving force available for crack growth. Mechanical tests have shown that the channels induce load fluctuations in the global load-displacement response. A significant increase in the total dissipated energy was observed with respect to bulk samples, i.e. no channels. The observed fluctuations in the global response were associated to the sequential storage and sudden release of elastic energy. Indeed, the spatial modulation of the stiffness around the interfacial region ultimately affects the crack driving force.
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Chemistry
Authors
Marco Alfano, Chiara Morano, Luigi Bruno, Maurizio Muzzupappa, Leonardo Pagnotta,