Performance prediction of animal drawn vehicle tyres in sand

Four animal drawn vehicle (ADV) tyres of 5.00–19, 6.00–19, 7.00–19 and 8.00–19 sizes were tested in sand under various but controlled conditions in an indoor soil bin. A tyre test carriage with four-bar parallel linkage was developed for accommodating a single wheel of different sizes. Performance tests were conducted at five levels of inflation pressure and load. The sand compaction level was varied in the range of 3.4–4.5 MPa/m and forward speed of the test carriage was maintained at 3.1 km/h. Performance of the tyres 7.00–19 and 8.00–19 was identical and offered less rolling resistance as compared to other tyres. However, their use in camel carts may not be recommended beyond the payload of 6 kN on single wheel with inflation pressure and sand compaction range of 172–379 kPa and 3.4 –4.5 MPa/m, respectively. Based on the experimental results, empirical models were developed to predict the performance of tyres. The accuracy of prediction of the developed empirical models was compared with that of existing semi-empirical approaches. Model with sand mobility number considered relatively simple and convenient to use in the field and yields reasonably good prediction for rolling resistance and sinkage.