Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7969085 | Materials Characterization | 2018 | 11 Pages |
Abstract
Degradation processes in high-temperature creep of two cast high-chromium cobalt-based superalloys strengthened by niobium and tantalum for use in the glass industry were analysed via various experimental techniques. Constant load creep tests were conducted at 900, 950 and 1000â¯Â°C in a tensile stress range from 40 to 80â¯MPa. It was found that the CoNb superalloy possesses considerably longer creep life compared to the CoTa superalloy under the same loading conditions. Conversely, the creep ductility of the fractured specimens shows the opposite order of the creep life. The creep behaviour of both superalloys obeys the Monkman-Grant formula indicating that the creep deformation mechanism and fracture processes are mutually interlinked. The homogeneously distributed creep damage of the CoNb superalloy is closely connected with primary carbides and is predominantly initiated either as interface decohesion between the carbide/matrix and carbide eutectics/matrix or by breakage of bulk M23C6 carbides. The dominant type of creep damage in the CoTa superalloy is localized breakage of M23C6 carbides in close proximity of the fracture path. The final brittle fracture in the CoNb superalloy occurs via relatively fast propagation of the longest cracks after the ultimate state of damage is reached. Due to premature fracture, the inherent creep ductility of the CoNb matrix is not exhausted. The final ductile transgranular creep fracture of the CoTa superalloy is caused by a local strain-induced instability of the dislocation microstructure leading to a loss of an external section of specimen (necking).
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Science (General)
Authors
Václav SkleniÄka, Marie Kvapilová, Petr Král, JiÅà DvoÅák, Milan Svoboda, Božena Podhorná, JiÅà Zýka, Karel HrbáÄek, AntonÃn Joch,