Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7971787 | Materials Science and Engineering: A | 2018 | 22 Pages |
Abstract
Non-isothermal heat treatment during welding results in a wide variety of microstructures which strongly affect the fatigue properties of the weldment. To improve the durability of weldments, the effect of microstructural heterogeneity on the fatigue behavior of welded joints should be thoroughly understood. In this paper, the role of microstructure features on the low cycle fatigue behavior of laser welded dual-phase 600 steel was studied by both experimental analysis and simulation. In-situ cyclic tests combined with scanning electron microscopy (SEM) imaging and electron backscattered diffraction (EBSD) were performed to identify microstructural deformations in different laser welded regions during cyclic loading. Microstructural characterization revealed that the microcracks caused by fatigue mostly occurred in the ferrite phase and close to the interface boundaries of ferrite/martensite. In the numerical part, the hierarchical micromechanical modeling using a representative volume element (RVE) was employed to study the regional mechanical properties of welded joints. 2D RVE calculations for different parts of the welded joints were based on the metallographic morphologies. The cyclic behavior of constituent phases (ferrite, martensite) in the microstructure of different regions was quantified based on the dislocation-density-based model and Ramberg-Osgood model. The laser weld joint model containing the RVEs of different weld regions could accurately predict the fatigue weak area of the laser welded joint. The hysteresis stress-strain loop of the welded joint with a heterogeneous multiphase microstructure was simulated and was in line with the experimental data.
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Science (General)
Authors
Ghazal Moeini, Ali Ramazani, Joerg Hildebrand, Christiane Roessler, Carsten Koenke,