Low cycle fatigue in aluminum single and bi-crystals: On the influence of crystal orientation

Aluminum single crystals with three different double-slip orientations ([2̅32], [3̅3̅2], [130]) and two aluminum bi-crystals - one with a high-angle grain boundary and one with a low-angle grain boundary - were cyclically deformed up to 100 cycles under constant displacement control. The distribution of the local strain and the local strain amplitudes was captured by in-situ digital image correlation (DIC). Dislocation structure analysis was performed by electron channeling contrast imaging (ECCI) and the evolution of local misorientations was recorded by high resolution electron backscatter diffraction (EBSD). The DIC results show a homogeneous strain amplitude distribution in the single crystals while the measured strain amplitude in the low-angle grain boundary bi-crystal sample differs significantly. ECCI observations reveal the presence of dislocation cells elongated along the trace of the primary {111} slip plane in all investigated crystals and the formation of deformation bands parallel to the trace of {110} planes. Deformation bands (DB) were observed in all samples but their frequency and misorientation with respect to the matrix was found to sensitively depend on the crystal orientation and the local strain amplitude. Our results on the bi-crystals show that the grain orientation mainly determines the local stresses and therefore also the formation of the associated dislocation structures rather than the grain boundary character.