| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 797652 | Mechanics of Materials | 2011 | 6 Pages |
Mode I and mode II fracture behaviour under static and dynamic loading was analyzed in two composites made up of the same reinforcement though embedded in two different matrices. Specifically, the delamination energy under static and dynamic loading was obtained for both materials and both fracture modes, i.e. the number of cycles necessary for the onset of fatigue delamination. Subsequently, the crack growth rate (delamination rate) was obtained for different percentages of the critical energy rate. The main goal of the study was to ascertain the influence of the matrix on the behaviour of the laminate under fatigue loading.From the experimental results for the onset of delamination, similar fatigue behaviour was observed at a low number of cycles for both matrices and both fracture modes, while in fatigue at a high number of cycles, a higher fatigue limit was obtained in the composite with the modified resin (higher toughness) for both fracture modes. From the point of view of crack growth rate, both materials behaved similarly for different levels of stress under fatigue and the two fracture modes for small crack lengths (initial growth zone < 5 mm), although the growth rate increased for large crack lengths. This behaviour was the same in both loading modes.
