Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
7980637 | Materials Science and Engineering: A | 2014 | 8 Pages |
Abstract
Here we present an approach to design a ferrite-based quadplex microstructure (ferrite/martensite/carbide/austenite) using a lean alloyed Mn-Si-Cr-Al ultrahigh carbon steel. The material has 1500 MPa tensile strength and 11% elongation. The thermomechanical processing includes two main steps, namely, first, the formation of a ferrite plus carbide duplex microstructure by warm rolling below Ae1; and second, annealing just above Ae1 for a short time (~20 min). The quadplex microstructure consists of 57 vol% ultrafine ferrite (mean grain size ~1.5 µm), 29 vol% martensite, 12 vol% spherical carbide and 2 vol% austenite. Fracture analysis after tensile deformation reveals a mixed ductile and brittle failure mode without necking. Scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and dilatometry tests were conducted to map the microstructure characteristics and the contribution of each phase to the overall deformation.
Related Topics
Physical Sciences and Engineering
Materials Science
Materials Science (General)
Authors
H. Zhang, D. Ponge, D. Raabe,