Article ID Journal Published Year Pages File Type
7981154 Materials Science and Engineering: A 2014 7 Pages PDF
Abstract
The TC8 titanium alloy was isothermally compressed at the deformation temperatures ranging from 820 °C to 980 °C, strain rates of 10 s−1, 30 s−1 and 50 s−1, and a height reduction of 60%. An optical microscope (OM) and a transmission electron microscope (TEM) were used to examine the microstructure. The flow stress decreases with the increasing of deformation temperature and decreasing of strain rate. The strain rate sensitivity exponent m increases gradually to a maximum value as the deformation temperature increases from 820 °C to 940 °C, and then decreases at the deformation temperature of 980 °C. The strain hardening exponent n decreases with the decreasing of deformation temperature, and gets a maximum value at the strain rate of 30 s−1 and a given deformation temperature. According to the microstructure examination, the variation of flow stress, m and n values are found to depend on the phase transformation, grain morphology, dislocation content, dynamic recovery (DRV) and dynamic recrystallization (DRX) of primary α and β phases. The apparent activation energy for deformation is 429.766±80.394-383.478±78.734 kJ mol−1, and indicates that the dislocation climbing is not the main deformation mechanism. This deduction agrees well with the microstructure examination which shows that the DRX of primary α phase and β phase play an important role in the isothermal compression of TC8 titanium alloy.
Related Topics
Physical Sciences and Engineering Materials Science Materials Science (General)
Authors
, ,