Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
798281 | Journal of the Mechanics and Physics of Solids | 2009 | 17 Pages |
A hybrid framework for inverse analysis of crack-tip cohesive-zone model is developed in this two-part paper to measure cohesive-zone laws of void growth in polymers by combining analytical, experimental, and numerical approaches. This paper focuses on experimental measurements of the cohesive-zone laws for two nonlinear fracture processes in glassy polymers, namely multiple crazing in crack-growth toughening of rubber-toughened high-impact polystyrene (HIPS) and crazing of steady-state crack growth in polymethylmethacrylate (PMMA) under a methanol environment. To this end, electronic speckle pattern interferometry (ESPI) is first applied to measure the crack-tip displacement fields surrounding the fracture process zones in these polymers. These fields are subsequently equilibrium smoothed and used in the extraction of the cohesive-zone laws via an analytical solution method of the inverse problem, the planar field projection method (P-FPM) [Hong, S., Kim, K.-S., 2003. Extraction of cohesive-zone laws from elastic far-fields of a cohesive crack tip: a field projection method. Journal of the Mechanics and Physics of Solids 51, 1267–1286]. Results show that the proposed framework of the P-FPM could provide a systematic way of finding the shape of the cohesive-zone laws governed by the different micro-mechanisms in the fracture processes. In HIPS, inter-particle multiple crazing develops and the craze zone broadens ahead of a crack-tip under mechanical loading. The corresponding cohesive-zone relationship of the multiple-craze zone is found to be highly convex, which indicates effectiveness of rubber particle toughening. It is also observed that the effective peak traction, 7 MPa, in the crack-tip cohesive zone of HIPS (30% rubber content) is lower than the uniaxial yield stress of 9 MPa, presumably due to stress multi-axiality effects. In contrast, in PMMA, methanol localizes the crack-tip craze, weakening the craze traction for craze-void initiation to about 9 MPa and the fibril pull-out stress to less than 6 MPa. This reduction in cohesive traction, coupled with a strongly concave traction–separation cohesive-zone relationship, signifies environmental embrittlement of PMMA. These experimentally determined cohesive-zone laws are compared with detailed numerical analyses of effective microscale-void growth ahead of a crack tip in Part II.