The influence of particle distribution and volume fraction on the post-necking behaviour of aluminium alloys

Experimental observations show that the continuous cast (CC) Al–Mg alloy with 0.21 wt% Fe has a considerably lower fracture strain than that of a CC alloy with 0.08 wt% Fe and a direct chill cast (DC) alloy with 0.21% Fe. However, the forming limit strains are almost the same for the three alloys. The similarities and differences are thought to relate with the distribution of hard second-phase particles. In the present paper, the influence of particle distribution characteristics (random vs. stringer pattern) and volume fraction (1.2% vs. 3.5%) is examined in detail with the use of a simple plane stress finite element unit cell model. The model permits extension of the composite stress–strain curve beyond the diffuse necking condition so that the nominally uniform response is followed directly by localized necking. The model results agree very well with tensile tests with respect to the differing behaviour of the three materials in the deformation range between the onset of diffuse necking and that for localized necking.